CAT Series

"CONTROLLED ACCESS TECHNOLOGY"


A complete access control system expandable to 16 doors and 255 relay points for control of elevators, HVAC, lights or other facility control applications that require activation or monitoring. Capacity of up to 16,200 cards, 2700 Phone numbers, 16 time zones, 16 Access levels and 16 access groups. Program with “SELCOM” software (Windows XP, Vista, 7,and 8 in their 32/64 bit versions) via internet or local using the built in modem or IP (NIC), RS232 or wireless.  Available with 2, 4, or 10 line LCD display.  All systems come with 2 relays (standard) and board level surge suppression at no additional cost.

CAT 2 (2 Line Display)
Model# Phone
capacity
Card
capacity
CAT2HF50 50 300
CAT2HF125 125 750
CAT2HF250 250 1500
CAT2HF500 500 3000
CAT2HF2700 2700 16200
CAT 4 (4 Line Display)
Model# Phone
capacity
Card
capacity
CAT4HF50 50 300
CAT4HF125 125 750
CAT4HF250 250 1500
CAT4HF500 500 3000
CAT4HF2700 2700 16200
CAT 10 (10 Line Display)
Model# Phone
capacity
Card
capacity
CAT10HF50 50 300
CAT10HF125 125 750
CAT10HF250 250 1500
CAT10HF500 500 3000
CAT10HF2700 2700 16200

 

 

 

 

 

 

          clientuploads/CAT Series/CAT_1.jpg

Above: CAT10 with OPTDF1 (Designer Door Frame)

Enhance the capabilities of the CAT Series with our
CAT Expansion Modules Model: CATDR4 (Card Access)
and Model: CATRL8 (Relay) for control of Elevators, HVAC, Lights 
or other facility control applications


DOWNLOAD MANUALS

   • CAT Installer Manuals

 

DOWNLOAD PRODUCT INFORMATION

   • CAT 10, 4 and 2 Product Sheet

   • CAT Series Showcase

 

DOWNLOAD A&E SPECIFICATIONS

   • A&E Specification Cat 2

   • A&E Specification Cat 4

   • A&E Specification Cat 10

OPTIONS

 

FOUR READER BOARD NIC2 NETWORK INTERFACE CARD WITH SERIAL PORTAL

Model: OPTK4DR
Replaces the CAT’s standard 2 card reader interface board with 4 reader interface board

Model: OPTNIC2
Network Interface Card that plugs into the CAT. This pc board allows connection to TCP/IP networks
   
   
DOOR SENSE INPUT AND ALARM SHUNT OUTPUT RELAY RS485 CONVERSION KIT
Model:  OPTKRLYC
Senses entrance state, open or closed and shunts existing alarm contacts <or> camera control and alarm output <or> 3rd door control
Model:  CATRS485CONVKIT
Conversion to RS485 is required for CAT expansion modules CATDR4 and/or the CATRLY8
   
CCD CAMERA MULTI UNIT INTERFACE, MUI
Model: OPTMINICOLORCAM
Color pin hole camera mounted inside of any CAT telephone entry processor
Model:  OPTKMUI
Allows up to 8 CAT systems to share a single telephone line.
(NOTE: ONE REQUIRED FOR EACH CAT PLACED ON A SINGLE LINE)
   
SERIAL I/O CAT CURRENT LOOP COMMUNICATIONS LINK
Model:  OPTKSERIAL90
Used to connect a computer to any CAT via RS232 interface
Model: CATCOM
Plug-in board for CAT to allow a computer to supply a current loop interface for long distance communications
(up to 1000 feet)
   
HANDSET UPGRADE, 24&#34, 36&#34, 48&#34 BATTERY
Model: OPTSH24 (24")
OPTSH36 (36")
OPTSH48 (48")
Converts Hands Free to Handset (Factory install only)
Model:  B12V
Provides a short term source of power. Charging circuit is provided from CAT.
   
   
   

 

 

 


ACCESSORIES

SEMI-FLUSH MOUNTING RINGWEATHER HOOD LIGHTED AND UNLIGHTEDSTAINLESS STEEL BACK BOX SLEEVEDESIGNER DOOR FRAMEPEDESTAL ADAPTERSHEAVY DUTY PEDESTALS

 

 

EXPANSION MODULES

The CAT Card Reader and Relay Expansion Modules are designed to provide greater capability and flexibility to the CAT Series. Use of these modules can expand the standard CAT or CAT Card units to control up to16 doors ( 3 CATDR4’s card reader modules) and 255 relay points ( 32 CATRLY8 relay modules) for applications such as control of elevators, HVAC, lights or other facility control points that require activation or monitoring. (CAT /CAT Card unit must have CATRS485CONVKIT installed).

 

This capability in addition to having up to 16,200 cards (with individual names), 16 time zones, 16 Access levels and 16 access groups meets a wide variety of applications.


Used with the intuitive latest “SELCOM Secured 7” software it can be easily programed and monitored via modem or the option IP NIC card. This software has made the CAT series compatible with Windows XP, Vista, 7,and 8 in their 32/64 bit versions. (Check Selcom 7 for required computer specs. and software editions) 

 

 

 

CATDR4 Provides reader expansion of ANY CAT or CAT Card systems. The wire distance from CAT to the farthest expansion module:
4000 feet. 3 MAX. PER CAT system.

 

 

  

 

CATRLY8 Provides relay expansion of ANY  CAT or CAT Card system. The wire distance from CAT to the farthest expansion module:
4000 feet. Up to (32) CATRLY8 Modules per CAT system.

DOWNLOAD CAT MANUALS

   • CATDR4 Manual

   • CATRLY8 Manual

 

DOWNLOAD CAT EXPANSION

   • CATDR4

   • CATRLY8