TEC2 Series

TELEPHONE ACCESS

 

The TEC2 provides telephone entry with the SES advantage. TEC2 series offers 2 line, 4 or 10 line LCD displays easily read in direct sunlight or at night and four capacities: 50, 125, 500 and 1000 to match your requirements. All systems come with 2 relays standard and board level surge suppression at no additional cost.

All TEC2 models have a wide variety of options so you can tailor the system to your specific needs, from card access and modem programming to linking units together on a single phone line using an MUI (Model: OPTKMUI). The stainless steel front door and aluminum back box are sure to provide years of durable service. Designed to the same high standards as the TEC1 and CAT product lines, the TEC2’s come with a two year limited warranty. 

 

TEC 2 (2 Line Display)
Model# Phone
Capacity
PIN
Capacity
T2HF50 50 60
T2HF125 125 135
T2HF250 250 260
T2HF500 500 510
T2HF1000 1000 1010
TEC 4 (4 Line Display)
Model# Phone
Capacity
PIN
Capacity
T4HF50 50 60
T4HF125 125 135
T4HF250 250 260
T4HF500 500 510
T4HF1000 1000 1010
TEC 10 (10 Line Display)
Model# Phone
Capacity
PIN
Capacity
T10HF50 50 60
T10HF125 125 135
T10HF250 250 260
T10HF500 500 510
T10HF1000 1000 1010
T10HF2000 2000 2000

  

clientuploads/TEC 2 Photos/TEC2_.jpgAbove:  Standard TEC2 (2 Line Display)

clientuploads/TEC 2 Photos/Tec4_1213.jpg
Above:  Standard TEC4 (4 Line Display)

Above:  Standard TEC10 (10 Line Display)

DOWNLOAD MANUAL

 

DOWNLOAD PRODUCT INFORMATION

A&E SPECIFICATION

OPTIONS

 

 

READER BOARD<BR>CARD ACCESS

 

FOUR READER BOARD <br> CARD ACCESS

Model: OPTKC2000
TEC Card Access Modules may be
used with existing Wiegand cards or other technologies which use Wiegand output.

Model: OPTK4DR
Replaces the 2 card reader interface board with a 4 reader interface board
Plug on Module

   

 

NIC2 NETWORK INTERFACE CARD WITH SERIAL PORTAL SERIAL I/O
Model: OPTNIC2
Network Interface Card that plugs into the TEC. This pc board allows connection to TCP/IP networks. Requires a network administrator to install software and IP address
Model:  OPTKSERIAL90
Used to connect a computer to any TEC via RS232 interface

 

 
DOOR SENSE INPUT AND ALARM SHUNT OUTPUT RELAY MULTI UNIT INTERFACE, MUI
Model:  OPTKRLYC
Senses entrance state, open or closed and shunts existing alarm contacts <or> camera control and alarm output <or> 3rd door control
Model:  OPTKMUI
Allows up to 8 units to share a single telephone line. (NOTE: ONE REQUIRED FOR EACH UNIT PLACED ON A SINGLE LINE)

 

Modem: 56K Baud

CURRENT LOOP COMMUNICATIONS LINK
Model: OPTKMODEM56K
Used for basic programming of TEC
units over phone line.
Model: CATCOM
Plug-in board for TEC to allow a computer to supply a current loop interface for long distance communications
(up to 1000 feet)

 

HANDSET UPGRADE, 24&#34, 36&#34, 48&#34

KEYPAD - BLUE BACKLIT

Model:
OPTSH29  (24")

OPTSH36 (36")
OPTSH48 (48")
Converts Hands Free to Handset (Factory install only)

Model:  OPTBLKEYPAD
Backlit Keypad for easier reading

 

 CCD CAMERA

CLOCK/CALENDAR
Model: OPTMINICOLORCAM
Color pin hole camera mounted inside of any TEC telephone entry processor
Model:  OPTKCLK
Allows automatic unlock/relock, time zones & time-date logging
Plug on Module

 

BATTERY  
Model:  B12V
Provides a short term source of power. Charging circuit is provided from TEC.
 


ACCESSORIES

SEMI-FLUSH MOUNTING RINGWEATHER HOOD LIGHTED AND UNLIGHTEDSTAINLESS STEEL BACK BOX SLEEVEDESIGNER DOOR FRAMEPEDESTAL ADAPTERSHEAVY DUTY PEDESTALS